Force Management Lifeline Support
Posts
Performance
- Designed to support the Uniline
Cable Fall Protection System when used on a variety of modern
roof structures, including built up on site, composite panels,
standing seam and single ply membrane.
- The Force Management Anchor has
a built in shock absorbing system which, in the event of
a fall re-orientates, reducing the loads transferred to
the roof sheet to less than 10Kn.
- Made entirely of marine grade 316
electro polished stainless steel, providing an aesthetic
finish with long term corrosion resistance and product life.
CE Marked, the Force Management System comes with a 25 year
guarantee.
- Certified to BSEN795 Class C &
A standards and endorsed by many of the leading roofing
manufacturers.
Force Management
Anchor for Metal Pitched & Composite Roofs
- The Force Management Anchor is secured
to the upper metal skin of the built up or composite panel
with the use of specialist Force Management structural fastener.
A watertight strip between the post base and the roof material,
together with self sealing washers ensures the anchor is
installed with a watertight finish.
Force Management
Anchor for Standing Seam Roofs
- The Force Management Anchor is clamped
onto the profile of the standing seam roof sheet with penetration
free aluminium block clamps.
Force Management
Anchor for Single Ply Membrane & Flat Roofs
- The Force Management Anchor is retro-fitted
from above, fixed through the finished roof to the support
decking beneath with the use of four blind-fix toggle bolts.
The base plates are available with a pre-coated membrane
to meet the bonding requirements of the roof manufacturer
and are designed with a recessed fixing hole to ensure a
smooth finish.
<Back
to Horizontal Lifelines |
