CSS Worksafe - fall arrest systems, health and safety, working at heights, ladder safety.

Height Safety Systems & Equipment: Maintenance, Inspection, Testing, Certification, Calibration.

Legislation dictates that all items of PPE and all safety systems undergo a periodic examination by a competent person under British & European law.

Minimum inspection requirements are set out in Legislation.

PPE (harnesses & Lanyards)	PPE Directive (89/686/EEC)	Minimum of every 12 Mths
Fall Arrest/Restraint Systems, Safety Eyebolts, Anchors	BS 7883:1997 Clause 12	Minimum of every 12 Mths
Ladder Restraint Ties	Manufacturer's Recommendation	Minimum of every 12 Mths
Portable Gas Detection Instruments	Manufacturer's Recommendation	Every 6 Mths
Breathing Apparatus / Escape Sets	Manufacturer's Recommendation	Every 6 Mths
Abseiling Points	PUWER Regulations LOLER Regulations	Minimum of every 12 Mths
Catenary Wire Systems	PUWER Regulations LOLER Regulations	Minimum of every 12 Mths

Please see our guide to: Maintenance of Height Safety Equipment & Regulations (Coverring Inspection, Testing and Maintenence)

CSS Worksafe can perform the thorough inspections required by legislation and/or equipment manufacturer's.

PPE, Gas Detection Equipment & Breathing Apparatus can be inspected either at customer's premises or at our centrally located workshop based in Bromsgove, Worcestershire.

Fall arrest/restraint systems, anchors, eyebolts, ladder ties, catenary wire systems and gantries obviously need to be inspected/tested in situ. CSS Worksafe can inspect and re certify any systems or fixings/anchors that have been installed in accordance with the relevant British/European standard.

Please click on one of the headings above to find out more or call us free on 0800 783 0757 to discuss your requirements in detail.

Recommended Life Span of PPE made from Webbing or Rope are governed by Manufacturers Recommendations.