CSS Worksafe - fall arrest systems, health and safety, working at heights, ladder safety.

Vertical Fall Protection Systems - Fall Arrest Systems for Ladders - EN 353-1 Guided Type Fall Arrestors on a Ridgid Anchorage Line

Arresta Rail Vertical Fall Protection System by Unistrut Safety Systems

Arresta Rail Fall Arrest System The Arresta Rail fall protection system by Unistrut is designed to arrest falls when ascending or descending vertical or near vertical access routes.

Available as standard in either hot-dipped galvanised steel (BS EN 1461) or marine grade stainless steel 316 S31. Non standard finishes such as power coated can be supplied upon request. The rail can be curved to a radius of 750mm.

The rail can be installed directly on to rungs or left or right hand stringers of ladders and non standard brackets can be supplied upon request.

Removable extension rails and sockets are available for use when entering and descending below ground, particularly useful when entering manholes, wet or dry wells, inspection chambers etc.

The compact, lightweight Slipgrip traveller with integral energy absorbtion completes the system.

Arresta Rail Fall Arrest System Arresta Rail End Stop with Ladder Lock-out Arresta Rail Exit Gate with Extension